Quad Lock Universal Adapter

Quad Lock is undisputed reference on the smartphone shells and supports.

A bicycle, during your sessions running, in motorcycle, in car, in sea or office, there is always a solution Quad Lock to support your phone.

If, however Quad Lock does not propose dedicated compatible hull for your smartphone, or if you already have a shell of another brand, you can then stick the'universal adapter Quad Lock and thus benefit from the entire eco-system of the mark.

With a powerful adhesive 3M, it fits perfectly to all smooth and non-porous surfaces such as plastic and metal.

Universal adhesive holder Quad Lock cannot, however not used on leather, rubber and any other porous materials.

To take off the universal adapter Quad Lock of your smartphone or its shell, it is recommended to gently heat the surface with a hairdryer to melt the glue.

Because of semi-permanent fixation, the universal adapter Quad Lock cannot be reused once taken off.

Installation of universal adapter Quad Lock :

• Clean the surface that will receive the support with a wipe, ideally coated with an alcoholic cleaner
• Once the surface is dry, remove the protective film from the universal adapter Quad Lock
• Position the adapter on your smartphone or its shell
• Press hard. Glue produces maximum effect after 24 hours

Universal Adapter Presentation Video Quad Lock :

What is included in the box?

• A universal adapter Quad Lock
• A small coated wipe for cleaning the surface to be glued

Detailed specifications of the universal adapter Quad Lock :

• Dimensions: 60 x 48 x 5 mm
• 3MTM VHB adhesive
• Sustainable composite construction
• Adheres to flat surfaces and very slightly arondis

Further information:

The universal adapter Quad Lock uses a 3MTM VHB 4952 adhesive that adheres to smooth, untextured and non-porous surfaces such as:

• Plastics such as PC, ABS, PVC, Nylon, Acrylic
• Unpainted metals
• Uncoated glass

The adhesive will not stick to the following materials:

• Rubber, TPU, TPE
• Leather
• Silicone
• Hydrophobic coated glass (also known as anti-fingerprint glass, which is found at the back of most modern smartphones)
• Soft to the touch coating or paint
• Plastics such as polypropylene (PP), polyethylene (PE), acetal and HDPE
• Wood

We strongly recommend using a case with the universal adapter if your phone has a glass back.

Please ensure that the surface on which the holder will be glued is thoroughly cleaned and dry before applying the universal adapter.

The 3MTM VHBTM is a single-use adhesive and is not reusable.